Hubs

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.

Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.

Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

- Forged aluminum construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc rotor compatible - 8/10-speed cassette compatibility - Quick-release - 135mm hub spacing

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling

• Grade 3 balls and magnetite rust proof finish • Abec 5 precision and silicone w seals • 3 times cryogenic race treatment • Bearings sold individually, not as pair

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.

- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately

• Aluminum hubs • Sealed bearings • 1-speed freewheel threading • 32-hole spoke drilling • Bolt-on 3/8-inch axle • 135mm hub spacing • Black or silver

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm thru axle - 78 x 15mm version: flush axle, no end caps

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

- Elite Series convertible cyclocross/gravel hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Use: Front Hub - Bearing: Sealed - Drilling: 28H - Material: AL6061 - Color: Blk - Brake Type: 6B - OLD: 100mm J-Bend Spoke: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull Spoke: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Front - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Rear - Gears: Flip/flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm

- Heat-treated axle for improved strength - Angled Flanges for lateral stability in wheel building - Rear hubs include a 4-Pawl Cassette body with 9-tooth driver - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Spacing / Axle: 14mm - Material: Alloy - Drilling: 48

- Aluminum hubs - Sealed bearing - Nutted - Use: Rear - Gears: Flip-flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading. - Weight: 313 grams

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

• Sealed cartridge bearings • High flange design • 120mm hub spacing • Lightweight, hollow, heat-treated axle • Fix/fix hub threading • 32 and 36-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, and white

- Aluminum hub body - Sealed bearings - 100mm OLD - 6-bolt disc rotor mount

• Aluminum hub body • Quick release • Black or silver

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm (See MT-3100) or 20mm thru-axle - 32 or 36-hole spoke drilling

- Aluminum hubs - Loose ball - Bolt-on - Axle: B/O 3/8 - Material: Aly - Color: Blk - Brake Type: 6B - OLD: 135mm

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Wt: 180g J-Bend: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - Thru axle design with 8-10 speed cassette and XD drivetrain options - Brake Type: 6B

- Aluminum hub - Sealed bearing - Black - 6-bolt disc brake rotor mount

• Aluminum hubs • Sealed bearings • Quick release • 8-speed cassette • 36-hole • 135mm rear spacing • Black or silver

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm Quick-Release: - LTF-L: 48.65mm - LTF-R: 48.65mm - CTF-L: 36.5mm - CTF-R: 36.5mm 12mm Thru-Axle: - LTF-L: 52.15mm - LTF-R: 52.15mm - CTF-L: 46.5mm - CTF-R: 46.5mm

- Elite Series road hubs - Straight pull and J-bend spoke options - Sealed bearings Straight Pull Spoke: PCD-L: 30.3mm PCD-R: 30.3mm LTF-L: 13.1mm LTF-R: 13.1mm CTF-L: 36.9mm CTF-R: 36.9mm J-Bend Spoke: PCD-L: 31mm PCD-R: 31mm LTF-L: 10.78mm LTF-R: 10.78mm CTF-L: 39.22mm CTF-R: 39.22mm

- Aluminum hubs - Sealed bearing - Nutted - Use: Front - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm - Bearing Type: Sealed

- Heat-treated axle for improved strength - Angled flanges for lateral stability in wheel building - Rear hubs include a 4-pawl cassette body with 9-tooth driver - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Axle: 14mm, 3/8-inch - Material: Alloy - Drilling: 36

- Includes 9T Micro drive cog - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Drilling: 36H - Axle: Nutted 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Loose

- Aluminum hubs - Sealed bearing - Nutted - Use: Rear 110mm - Driver: Singlespeed cassette w/12T cog and lockring - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed - Drilling: 36

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

- Aluminum hubs - Sealed bearing - Black - 6-bolt disc rotor

- Centerlock, 11- speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included - Spacing / Axle: QR - OLD: 100mm

- Aluminum hubs - Sealed bearing - Quick release - Brake Type: RIM - OLD: 100mm

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano/SRAM 8-11s and XD cassette body options with 6 pawl/54 point/6.6° engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings J-Bend SPECIFICATIONS - OLD: 148mm - Left Flange Diameter: 58mm - Right Flange Diameter: 458mm - Left Locknut-To-Flange: 36.65mm - Right Locknut-To-Flange: 51.35mm - Left Center-To-Flange: 37.5mm - Right Center-To-Flange: 22.8mm Straight-Pull SPECIFICATIONS - OLD: 148mm - Left Flange Diameter: 55mm - Right Flange Diameter: 55mm - Left Locknut-To-Flange: 39.5mm - Right Locknut-To-Flange: 53.8mm - Left Center-To-Flange: 34.65mm - Right Center-To-Flange: 20.35mm

- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length) - Choose 70mm or 90mm drum brake front hub (brake lever sold separately)