Filter By:
- Parts & Accessories (113)
- Cranksets (198)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cranksets
$13.60 - $14.18
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
$14.18
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D. for use with SRAM DUB cranks
- 10 spacers per bag
- Machined engineering-grade Delrin
$14.18
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 1.0mm thick
- 10 spacers per bag
- Machined engineering-grade Delrin
$22.05
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
$22.50
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
$26.25
These are 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black, these spacers can be used for a few different scenarios. First, when used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline). Second, for Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers between each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm.
Specs
- Bottom Bracket/Frame Interface: Any 46mm ID BB shell: PF30, Specialized Carbon OSBB, 386EVO, 392EVO, BBRIGHT
- Inside Diameter: 46.20mm
- Outside Diameter: 52.00mm
Bag Includes:
- 2.5mm bottom bracket cup spacers (46mm ID) x 2
- 1.0mm bottom bracket cup spacers (46mm ID) x 4
$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
$61.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
$64.05
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
$64.05
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$64.05
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$64.05
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$64.05
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$209.99
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for chainline adjustment and a puller for removing adapters - Includes: (8) Shimano adapter (24mm ID, Shimano right or left; SRAM right only), (4) SRAM-left adapter (22mm ID, Shimano right or left; SRAM right only), (4) SRAM-right adapter (24mm ID, Shimano right or left; SRAM right only), (12) 0.7mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 2.5mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (8) 1.0mm spacer - left (30mm ID, SRAM), (4) 2.5mm spacer - left (30mm ID, SRAM), (4) 5mm spacer - left (30mm ID, SRAM), (4) 10mm spacer - left (30mm ID, SRAM), (8) wave washer, (1) removal tool for pulling adapter out of BB
$160.99 - $170.99
The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up.
- Designed for use with a 22mm Mid Bottom Bracket (not included)
- Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated
- Grind-friendly, square-shape arms
- RSD/LSD compatible
$165.99
The Legacy crank uses a super tough 2 1/2 piece construction, a larger 22mm spindle, and square-shaped chromoly arms to maximize strength. We looked at areas where other branded cranks often failed, and we toughened up areas like the pedal boss with its own investment-cast gusset to beef things up.
- Designed for use with a 22mm Mid Bottom Bracket (not included)
- Grind-friendly square shape arms
- Investment cast gussets on the pedal bosses
- RSD/LSD compatible
$170.99
WeThePeople's Team Crank uses a super-tough 2 1/2 piece construction, a larger 22mm spindle, and square-shaped chromoly arms to maximize strength. WeThePeople looked at areas where other brands' cranks often failed and toughened up areas like the pedal boss with its own investment cast gusset, to beef things up and eliminate those failures. The Legacy Crank also comes in a shorter 165mm option for all you 4-peggers out there.
$242.00
The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells.
- Solid forged alloy 6061
- Forged 7050 30mm spindle
- Polished anodized black with laser graphics
- Number of Chainrings: Single
- Chainline/Hub Compatibility: 120 Hubs
- Crank Intended Use: Track
- Pedal Spindle: 9/16"
- Rings: 49
- Spindle Interface Type: 386 EVO
- Drivetrain Speeds: Single Speed 1/2" x 1/8"
- Chainring BCD: 144
- BB Included: No
$200.00
With their New Rando crankset, Velo Orange meets the demand for the classic 50.4 BCD crank still sought after in randonneuring and touring circles around the world. New Rando is modeled after classic 50.4 BCD cranks but with modern touches to improve performance. These include ramped and pinned chainrings that are thicker for less flex, stainless steel hardware, and forged 7075 aluminum arms. Get the classic style and versatility you want with the modern performance you've come to expect.
- Spindle interface: Square Taper JIS
- Weight: 540g
Precision, stiffness and power are yours with TruVativ's X0 Crankset. It boasts carbon arms with a forged aluminum spine for mountain-topping stiffness and hyper-low weight. Gear changes are just as impressive as the stiffness-to-weight ratio thanks to TruVativ's super-stiff X-glide chainrings that deliver crisp, lightning-quick shifting that you'll have to experience to believe. With the weight of a feather and the stiffness of an I-beam, TruVativ's X0 cranks are your ticket to off-road heaven.
$12.00
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included
$21.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications
- CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
$50.00
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
$146.00
The Descendant 7K crankset delivers consistent performance every ride. Featuring SRAM's X-SYNC2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with SRAM chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability.
- 56.5mm chainline (Super Boost+)
- The Descendant 7K crankset is compatible with the SRAM Eagle drivetrain system
- Featuring SRAM’s X-SYNC2 tooth profile
- Optimized 7000 series forged aluminum arms
- SRAM DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible
- Direct Mount ring
- ISO 4210 compliant
- 12-Speed
- DUB bottom bracket sold separately
$280.00
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Carbon construction for lightweight durability
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
- Fully compatible with any 1x drivetrain
- BB Included: No
- Chainring BCD: SRAM Direct Mount
- Crank Intended Use: Mountain
- Number of Chainrings: Single
- Drivetrain Speeds: 12, 11, 10
- Spindle Interface Type: SRAM DUB
- Chainline/Hub Compatibility: 141/148 Boost Hubs
$280.00
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Carbon construction for lightweight durability
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
- Fully compatible with any 1x drivetrain
- BB Included: No
- Chainring BCD: SRAM Direct Mount
- Crank Intended Use: Mountain
- Number of Chainrings: Single
- Drivetrain Speeds: 12, 11, 10
- Spindle Interface Type: SRAM DUB
- Chainline/Hub Compatibility: 135/142 MTB Hubs
$280.00
The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Proprietary carbon layup technology
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
- Fully compatible with any 1x drivetrain
- BB Included: No
- Chainring BCD: Sram Direct Mount
- Crank Intended Use: Mountain
- Number of Chainrings: Single
- Drivetrain Speeds: 12, 11, 10
- Spindle Interface Type: SRAM DUB
- Chainline/Hub Compatibility: 141/148 Boost Hubs
$280.00
Sharpened For Speed
We designed the new STYLO Carbon crankset for riders who feel most at home when riding endless single track. This is a completely new crankset, employing our proprietary layup technology. Built tough to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff, and light. Combined with the new SRAM Eagle direct-mount chainrings, it's a compatible crankset to the Eagle drivetrain. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability.
Features:
- Proprietary carbon layup technology.
- Fully compatible with any 1x drivetrain.
- DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination, and is forward and backward compatible.
- Direct-mount ring.
- ISO 4210 compliant. See Declaration of Conformity for details.
Specifications:
- Speeds: 11/12
- BB Compatibility: DUB BSA MTB 100, DUB PF MTB 121, DUB BSA73,DUB PF89.5,DUB PF92,DUB PF30 MTB73,DUB BB30 MTB73, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP
- Chainring Size: 30, 32, 34
- Crank Arm Length: 170mm, 175mm
- Chainline: 49.0mm, 52.0mm, 55.0mm, 66.5mm, 76.5mm
- BB Spindle Interface: DUB
- Chainring Material: Aluminum
- Guard: No Guard
- Bolt Circle Diameter (BCD): Direct Mount (DM)
- Crank Arm Material: Carbon
$280.00
The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Proprietary carbon layup technology
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
- Fully compatible with any 1x drivetrain
- BB Included: No
- Chainring BCD: Sram Direct Mount
- Crank Intended Use: Mountain
- Number of Chainrings: Single
- Drivetrain Speeds: 12, 11, 10
- Spindle Interface Type: SRAM DUB
- Chainline/Hub Compatibility: 135/142 MTB Hubs
$290.00
The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Proprietary carbon layup technology
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
- Fat bike frame compatible
- BB Included: No
- Chainring BCD: SRAM Direct Mount
- Crank Intended Use: Mountain
- Number of Chainrings: Single
- Drivetrain Speeds: 12, 11, 10
- Spindle Interface Type: SRAM DUB
- Chainline/Hub Compatibility: 170/177 Hubs
$484.00
Performance Creativity
For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright.
Specifications:
- Speeds: 11/12
- BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP
- Chainring Size: 32
- Crank Arm Length: 165mm, 170mm, 175mm
- Chainline: 52.0mm
- BB Spindle Interface: DUB
- Chainring Material: Aluminum
- Guard: No Guard
- Bolt Circle Diameter (BCD: Direct Mount (DM)
- Crank Arm Material: Carbon
$23.99
- Universal bottom bracket style mount
- 44T maximum chainring size
- Impact-resistant plastic
- Size: Universal
- Application: BB Mount
$34.99
• 6/7/8-speed MTB crankset
• Square taper interface
• Coated steel arms/riveted steel chainrings
• Includes plastic chainguard
• Does not include BB
• Weight: 1465 grams
$39.99 - $55.99
• Singlespeed crankset
• Alloy crankarms w/ solid steel chainring
• Square taper interface
• Does not include BB
$39.99 - $44.99
- Steel chainring with forged alloy crank arms and double chainguard
- Compatible with 3/32" chains
- 45mm chainline
- Spindle Type: 118 SQR JIS
$44.99
- AL6061-T6 crank with steel chainrings
- 7/8sp compatible
- 177mm Q-factor
- 48.5mm chainline
Page 1 of 6
Next page