Fenders

The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible

Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame. - Urban fender set - Sturdy aluminum profile design for urban bikes - Black U-stay - Includes accessory parts and stays - Weight: 568g

Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. Accessorize your ride and keep yourself dry. - Front and rear full-length fenders designed for use on Townie 26-inch bicycles - Fits both Step-Thru and Step-Over Townie Original models - Compatible with tires up to 2.0-inch wide - Protects against pesky mud and splashes

The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. - Front and rear full-length fenders designed for use on Townie Path bicycles - Fits both Step-Thru and Step-Over Townie Path models - Compatible with tires up to 2.35-inch wide - Protects against pesky mud and splashes

It's fender season Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso. Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation. - Fully assembled fenders that install in minutes with only two tools - Durable no-cut alloy struts allow quick adjustment for proper tire clearance - Made of premium aluminum for added durability and reduced flexing and vibration - Double-back strut on rear fender adds support and stability - Stainless steel hardware

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

- Color: Black - Maximum Tire Width: 35 mm - Fender Width: 45 mm - Wheel Size: 700c - Material: Aluminum - Requires Eyelets?: Yes

Keep your tail clean On some rides you want a fender. The Universal Fat Bike Fender is designed to offer quick and easy installation so that riding with a fender can be a game-time decision. The versatile attachment clamp securely mounts to most seatposts, and the front and rear set are designed to work with tire widths from 3.0 to 4.75 inches. Product details - Front and rear fender set fits tire widths from 3.0 to 4.75 inches - Versatile fender offers simple and effective protection from the elements - Universal attachment clamp designed to fit most seatposts - Quick and easy installation or removal - Trim lines on front fender offer customizable shape to fit tires and bike

Ass-Savers x All-City Rear Fender

- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications

Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces

Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Townie 26" bicycles ONLY - Fits both men's and ladies' 26" Townie models - Protects against splashes - WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - 150mm mudflaps for extra coverage - Adjustable stainless steel stays create a secure fit on any style recumbent - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 700c - Fender width: 43mm - Max tire size: 700c x 35mm - Weight: 418 grams (rear)

The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams

Turn your 'bent into an all-weather vehicle with Planet Bike's Hardcore Fender! Made of unbreakable Superflex polycarbonate with stainless-steel stays, it's ultra-tough. The adjustable stay positioning provides a secure fit on any style recumbent. The mudflap provides the ultimate in splash and spray resistance. Plus, the hardware is pre-installed for hassle-free mounting.